Skip to content Skip to sidebar Skip to footer

Audi A5 Schlüssel Anlernen Nach Batteriewechsel

Table of Contents [Show]

Audi A4 replace battery remote radio control key fob / Schlüssel
Audi A4 replace battery remote radio control key fob / Schlüssel from www.youtube.com

Introduction

Changing the battery of your Audi A5 key fob is a simple and common task. However, after replacing the battery, you may find that your key fob no longer works with your car. This is because the key fob needs to be reprogrammed or re-learned to work with your Audi A5. In this article, we will guide you through the process of reprogramming your Audi A5 key fob after a battery change.

Step 1: Gather Materials

Before starting the process, make sure you have the following materials:

  • Audi A5 key fob
  • New battery
  • Audi A5 car

Step 2: Enter Learning Mode

The first step in reprogramming your Audi A5 key fob is to enter learning mode. To do this, you need to follow these steps:

  1. Insert the key into the ignition and turn it to the "On" position.
  2. Use another key to lock the car from the outside.
  3. Press and hold the "Unlock" button on the key fob.
  4. While holding the "Unlock" button, press the "Lock" button three times.
  5. Release the "Unlock" button.

Step 3: Program the Key Fob

After entering learning mode, you need to program the key fob. To do this, follow these steps:

  1. Press the "Unlock" button on the key fob.
  2. Wait for the car to beep twice.
  3. Press the "Lock" button on the key fob.
  4. Wait for the car to beep twice again.
  5. Remove the key from the ignition.
  6. Test the key fob to make sure it works with your Audi A5.

FAQs

1. Do I need to reprogram my Audi A5 key fob after a battery change?

Yes, you need to reprogram your Audi A5 key fob after a battery change because the key fob needs to be re-learned to work with your car.

2. Can I reprogram my Audi A5 key fob myself?

Yes, you can reprogram your Audi A5 key fob yourself. Follow the steps outlined in this article to do so.

3. What if my key fob still doesn't work after reprogramming it?

If your key fob still doesn't work after reprogramming it, there may be a problem with the key fob or the car's electronics. In this case, you may need to take your car to a professional for further diagnosis and repair.

Conclusion

Reprogramming your Audi A5 key fob after a battery change is a simple process that you can do yourself. By following the steps outlined in this article, you can save yourself time and money by not having to take your car to a professional to reprogram your key fob. If you have any further questions or concerns, consult your car's manual or contact a professional for assistance.


Kommentar veröffentlichen for "Audi A5 Schlüssel Anlernen Nach Batteriewechsel"